15mm Pipe Flap Valve - prints assembled!
15mm Pipe Flap Valve - prints assembled!
3D
Published 2019-09-23T12:55:11+00:00
This was a fun one! A flap valve in two parts, already assembled and ready to go right off the print bed! My hardware store didn't stock flap valves in sizes to suit small tubing, so here we are. This is sized for "15mm" PVC tubing, which has an outer diameter of about 21.3mm from my supplier.
Now, the the fit of the hinge is intentionally pretty loose, since it needs to flap back down after being pushed open by water. This means it should scale to some degree if you do want to resize it. But hey, it's 3D printing, and this is a pretty quick print, so experiment and see how it goes :)
Have fun!
Easy print - designed for printing without support, already assembled. You may need to slide something between the flap and the tube once it's printed, to break any minor bonds that might have formed during printing.
| 发表的日期 | 23/09/2019 |
| 支持自定义 | YES |
