Skyrim Frost Dragon
Skyrim Frost Dragon
Published 2018-01-12T11:36:54+00:00
UPDATE APRIL 8 2018: The hollow parts have been replaced with solid parts, because they did not print properly once scaled down. Please let me know if you have any problems with these parts.
This is a model of a frost dragon taken from the game Skyrim. It is not my original creation.
The original model was altered to shorten the rock it stands on, close the holes, and create thicker wings. At full size assembled, it is approximately 37 cm wide x 32 cm high x 40 cm deep. The parts at full scale fit on an Original Prusa i3 MK2S.
I have hollowed the parts to save material and at full scale they have 1mm thick walls, except for the bottom-most (pillar bottom) piece to give it more weight. You may wish to add even more weight as the statue's center of gravity is shifted to the front and may tip on unstable surfaces.
Sorry there's no pics of the parts by themselves, I was assembling and painting as I went along.
I have a file with the dragon all in one piece, but it's too large to upload here. If I find a way to cut down the size, I will upload it here. Otherwise you will need to find it on another website.
Support material needed: Yes (auto-generated in slicer)
Layer height: 0.15 mm
Infill: 20% (parts are hollow except the pillar bottom and wings)
Print times with settings as above:
pillar base (not hollow): 14 h 19 m
pillar top: 8 h 51 m
body bottom: 8 h 52 m
body top: 18 h 25 m
left wing: 18 h 5 m
right wing: 17 h 11 m
head: 7 h 20 m
发表的日期 | 12/01/2018 |
打印工艺 | FDM |
复杂程度 | 中级 |
100% scale took about a week to print. Totally worth it, thanks for the great model!