Totoro Tea Candle Holder With Umbrella
- 同人作品 |
- 家居产品>
- 起居室>
- Candle holders
Totoro Tea Candle Holder With Umbrella
3D
Published 2018-10-29T16:10:50+00:00
I created this piece for my wife and I got her permission to share it with everyone! I printed it on my Prusa I3 Mk3 with 20% infill. The middle is hollowed out to reduce the amount of material. However, it still comes out pretty hefty. I designed it so that a tea candle (battery operated) will fit nicely in the tray. This piece looks great on the shelf either painted or unpainted! Overall, Totoro stands 21cm high with the umbrella.
*Update 10/30/18
I just noticed that there was an issue with the upload and the small sleeve part was corrupted. Very sorry for any inconvenience! I've re-uploaded the .stl file with all the parts.
The umbrella can be a bit tricky to print so I split it into two halves and glued it together. A small sleeve is glued to the underside to support the umbrella pole. For that, I used a short piece (about 10.5cm) of 3.15mm metal rod from the hardware store.
| 发表的日期 | 29/10/2018 |
| 尺寸大小 | 140mmx125mmx165mm |
| 打印工艺 | FDM |
| 复杂程度 | 容易 |
Thanks for sharing such a nice model to print. I did a little addition to get things put together for a photo till I can find a rod for it.