Great illusion. Artfully done.

Great illusion and a relatively easy print. I printed the pole vertically with a 20 line brim. The body was printed at .3mm layer height, the rest at .2mm. I had to file the gear, the arm, and the hole a bit to get them seated properly. The only glue I used was to keep the pole in place. I found the best way for me to line up the pole was to center it in the hole as shown in the picture. I used some putty to keep it immobile while the epoxy set up.

Printed with Click & Print. Family is going to love it !

Great model thanks

Printed in PolyAlchemy Nightshade Elixir (base and hole) and Abyss (platform and arm), and Prusa Silver(grip, bearings, and pole).

Fun print

Great Design and interesting concept Color: Black & Yellow Infill: 15%

Printed at 0.15 mm on an ender 3 pro and a Prusa mini 215/60

Easy to print and fun illusion. Thanks for sharing. Here is my make .. https://youtu.be/Z46ZNj2Jz9Q

Niece loved it A little "Liquid Bearings" on the moving parts improve ALL your models exponentially.