Scalar S - 3D Printer (20x20x20cm)
Scalar S - 3D Printer (20x20x20cm)
Published 2017-06-12T16:57:39+00:00
Overview
This thing presents Scalar S 3D printer.
Scalar Family 3D printers are "scalable" printers.
Reviewing the idea of a reprap printer, a printer that can auto replicate and scale, we wanted to propose a 3D printer with plastic parts for you to print, and with a way to "scale" easily.
Key Features:
- Simple design based on standard 2020 extrusion profiles
- All axis are rolling over VSlot extrusion profiles. All Smooth rods have been removed removed
- More secure with our new SSR cover system modified for 2020
- Evolutive Design : More upgrades are to come!
- Lightweight and strong frame
- Smooth and Silent: using VSlots and V Wheels for X and Y axis
-
More secure with our new SSR cover system: https://www.myminifactory.com/object/ssr-solid-state-relay-cover-for-3030-and-2020-extrusion-profiles-37864
-
More stability and Accuracy with
Bed with Dual drive system (https://www.myminifactory.com/object/scalar-dual-drive-system-for-scalar-heatbeds-37860) -
Z Axis based on Strong Jaw System (https://www.myminifactory.com/object/scalar-strong-jaws-system-37862)
-
Possible upgrade to Helix drive system: (https://www.myminifactory.com/object/scalar-helix-drive-system-37863)
Assembly instructions:
Assembly instructions can be found on our website documentation page (in french for now, but can easily be understood by english speeking folk:
http://doc.3dmodularsystems.com/assembly-instructions-for-scalar-3d-printer/notice-de-montage-de-scalar-s/
Printer presentation
ACCESSORIES:
Tools:
Hot end holders:
AllInOne Hot end holder: (https://www.myminifactory.com/object/scalar-allinone-hotend-holder-37866)
AluHotEnd V6/V7 holder: (https://www.myminifactory.com/object/scalar-aluhotend-v6-v7-hotend-holder-37867)
Prometheus V1.1 hot end holder: (https://www.myminifactory.com/object/scalar-prometheus-hot-end-holder-37869
E3D V6 Hot end holder: (https://www.myminifactory.com/object/scalar-e3d-hot-end-support-for-scalar-family-3d-printers-37870)
Tennis ball vibration dampers: (https://www.myminifactory.com/object/scalar-tennis-ball-damper-feet-37871)
Upgrades
Dual Drive Systems: (https://www.myminifactory.com/object/scalar-dual-drive-system-for-scalar-heatbeds-37860)
Helix Drive system: (https://www.myminifactory.com/object/scalar-helix-drive-system-37863)
Strong Jaws System: (https://www.myminifactory.com/object/scalar-strong-jaws-system-37862)
Spool
Scalar - UFO Spool Holder: (https://www.myminifactory.com/object/scalar-ufo-spool-holder-37872)
Electronic:
Electronic (Arduino+Ramps+LCD2004) box: (https://www.myminifactory.com/object/v1-v2-0-scalar-electronic-box-for-mega-ramps-lcd2004-37873)
Scalar - Ramps 1.4 Box / Case Lite : (https://www.myminifactory.com/object/scalar-ramps-1-4-box-case-lite-37874)
200W PSU cover box: (https://www.myminifactory.com/object/scalar-200w-power-supply-box-37875)
Tools/Accessories:
Pensil Sharpener holder: (https://www.myminifactory.com/object/scalar-pencil-sharpener-holder-stand-37876)
Extrusion Profile Cable ties Clips: (https://www.myminifactory.com/object/scalar-cable-clips-37877)
Extrusion profiles Joints: (https://www.myminifactory.com/object/scalar-3030-extrusion-joint-37878)
Vibration/Sound Damper feet: (https://www.myminifactory.com/object/scalar-vibration-dampers-for-3030-extrusion-profiles-37879)
Scalar - UFO Spool Holder: (https://www.myminifactory.com/object/scalar-ufo-spool-holder-37872)
Misc
Calibration set: (https://www.myminifactory.com/object/scalar-calibration-set-of-plastic-parts-37880)
Firmware
The procedure to install the firmware on Scalar 3D printer is available on our documentation page:
http://doc.3dmodularsystems.com/updatingupgrading-your-3d-printer-firmware/
You will also find the newest firmware available to download directly on the page.
Special thanks to Marlin Community for providing this great firmware and evolutions.
Where to buy:
http://3dmodularsystems.com/en/3d-printers/222-scalar-s-3d-printer-20x20x20-cm.html
Characteristics:
Mainly all technical information can be found on our website:
http://3dmodularsystems.com
But here is a summary of the main characteristics :
Scalar S Premium :
- Standard build platform: 200x200mm heat-bed
- 220V 250w silicon heat-bed with a 3mm aluminium print surface
- Compatible with well known hot ends (E3D, E3D Lite6, Hexagone, ...), 3mm and 1.75mm
- Built-in blower fan
- Built-in LCD and SD card support
- Built-in spool holder
- 120W 12V stand alone power supply block
- Inductive probe for bed levelling
- Plastic parts available for different hot ends: E3D, E3D lite6, AluHotEnd and Prometheus V1.1.
- Modular Design
Scalability:
Because you guys have different ways of life, events happening and so on, we wanted to make sure that those printers can be scaled by only adding the necessary parts to upgrade/downgrade your printers.
This way whenever you want the printer to be bigger then we have a kit for that.
The Scalar S has just been released so future upgrades are to come.
BOM:
Available on our documentation page http://doc.3dmodularsystems.com/assembly-instructions-for-scalar-3d-printer/notice-de-montage-de-scalar-s/
3D Modular Systems
Evolutive 3D Printers
You enjoy it and want to help us with a donation: https://www.paypal.me/3DMS
http://www.3dmodularsystems.com
Twitter: https://twitter.com/3dmodularsystem
Youtube: http://www.youtube.com/c/3DModularSystems3DPrinters
Date published | 12/06/2017 |
Tecnologia | FDM |
Complessità | Medium |