Love it, supports used. As mentioned in comments lots of holes no matter what I sliced with. S3D, Cura, ,MC etc.

Printed great on my Lulzbot Mini. Putting file through netfabb fixed issues for me.

Wood filament print. High res

Printed with PLA, 0.2mm layers. Took about 8 hours.

Scaled 70% Resolution 0.1 With supports Took 6 hours top print

Turned out awesome!! 0.1mm layer height. No supports. 14 hrs to print.

Printed this out for my wife for Christmas, one layer of spray primer filler, and some acrylic paints

I love this file, man! Printing in Hatchbox Wood PLA looks really nice and has a great surface finish. Thank you!

Awesome design. Wood Filament. 6-hour print. 10% infill, 0.2 resolution.

Love love love this project. Printed on my BQ Hephestos 2 and used Hatchbox Wood PLA. I also applied Flex Seal to the top opening to seal in the top for the flowers. https://www.youtube.com/watch?v=pJV-d1RU21E

Printed on ColorFabb Light Brown PLA/PHA. Armpits are a bit hairy. Very pretty and fun print! Very popular print here.

This was printed with Hatchbox wood PLA on high detail with 10% infill. Out of everything I have printed on my R1+ this has been my all time favorite!

Baby groot, sanded and painted. Thanks for the design

Printed a smaller version of the original. This was to try out a more detailed print.

MG Chemicals wood filament.

Impresso na impressora Stella

Wood filament

Printed using FormFutura Wood filament. Scaled at 150%.

Printed in SainSmart wood filament at .15 mm layer height. I plan to seal the inside with FlexiSeal or similar before planting a something small in it. I may finish the outside somehow but I am not sure since I have heard staining doesn't work well with this filament, I may try on a different print first.

Printed on Creality CR-10 using .4 mm nozzle. Sliced with CURA using using .14mm layer height. Printed with support material.

Printed in colorfabb white PLA then hand painted with acrylic paints. Then coated with a clear lacquer to protect paint from soil and water.

This came out great! Cant wait to paint it or maybe I should try a wood PLA

This print worked great and turned out to be an awesome present, thanks for sharing.

Printed in wood and cork only to try what these material does with my printer (Jr Pro) .Everything is printed, not the only the baby Groot, also the flowers and leafs. Some paint and a hairdryer makes the rest. Thx, wonderfull design.

Baby Groot - 3D printing test with Lumipocket LT and Lumireact HS resin natural color

Printed with a Tevo Black Widow. Material was ICE Filament Wood-PLA.

PLA Bronze infill

Printed these for some friends.

Really enjoyed painting this great sculpt.

Printed without scalar, 35% infill, with supports.

Thanks a lot Tom for this great design! I modified the baby a litte to get the fingers seperate and closed some gaps at the back, so that pouring the plant will not overflow some water - I hope you are OK with it :D Ahh... and I did upscale it a little (about 1.5) so that a 6cm pot fits in (made it to 121g with supports) Printed with my creality CR-10. Now the important part :)

Thanks Tom :)

Our baby Groot)

Loved this one! I think it looks great even without paint.

Made with ColorFabb's Woodfill (so it is really wood). Need to stain and paint it next.

esun wood

It's a little bigger then the original

0.3mm height, 10% infill, woodfill. 5-6 print hours

This was only the third thing off the bed on my CR-10 and at 205 nozzle/60 bed temps and 60mm/s using Rigid Ink pink PLA, the result is as shown. I'm very happy :-)

Thanks for the file, is awesome!!!

Thank you soo very Much Tom. My wife loves this. Printed at 275% so she could really use it as a flower pot. Took 54 Hrs but very happy wifey.

Before sanding. amazing design really happy with how it come out. i printed it on the Anycubic i3 mega

painted an add eyes modeled the eye shapes in tinker cad and subtracted from original model then stuck in some resin eyes.

Printed on Anycubic i3 MEGA Thanks for the great model. Airbrushed with mr.hobby paints. Gundam panel line markers. Some dry brushing. Gloss on eyes. Might still put a flat clear coat on ... but happy with result...now for something to put in it :-D

0.15 height 10% Infil My first go at airbrushing

Printed on QIDI Tech X-ONE, using their orange PLA. Painted with acrylics

Printed in hempfill pla (filaments.ca)

Printed at 200% scale, 0.2mm layer height, 13% infill, and at 100mm/s. Great model to print.

.1 mm layer height with supports

200% print using wood PLA, painted using a Hawthorn stain. Had to print his crown separately after a nozzle block. Love the model!

Only my 3rd print, I'm a newbie

Abs layer height 0.1618 printed at 200% benchy for scale printed on a tevo little monster with enclosure. Now to paint

Printed myself and painted by my talented GF. Christmas Gift for Mum.

Painted version, acrylic paint and brush

200% scale Layer height 0.1618 30% infill 4walls about 23hrs no post processing just painted with acrylic paints and brush and some static grass and spray clear lacquer. Alovera for plant. Thanks for the stl Tom.

0.1 layer. 30mm/s print speed. Pure perfection.

-22 hours, 44 minutes -200% scale (20cm tall) -3DNet PLA Silver -Nozzle 195 -Bed 60 -Bed adhesive: PVA glue

Printed at 180% with wood filament. Thanks for the great model.

Cannibalised a dishwashing green sponge for the "moss"! Great print!

Hi everyone ! Here is mine, first print on a CR 10 (and first print ever) Setup : PLA, 200% scale, 0.2 mm layer, 13% infill, 80 mm/s print speed, 200°C/60°, no support, 8mm brim = 17h30 on cura, ~20h IRL I already cleaned the default on the first photo, with no support I got some defaults below the arms and at the bottom of the chin. For the paint : 2 layers of varnish (a try to hide the vertical lines) and brown spray + Badab Black paint for warhammer. Very happy of the result, thanks for this awsome piece of art ;)

Printed in HIPS on Anet A8 clone, painted in acrylic and stuffed with tinted moss and artificial berries

Bronze Glossy PLA

Awesome model, and my 2nd print ever! Turned out amazing on the CR-10 (though I was excited and for got the supports and needed some love in a couple spots under the arms and chin with miliput). Finished with filler primer and acrylic paints. Thanks for the model!

I bought my 1st 3D Printer because of this awesome model that you had create.Its my first ever attempt to paint a 3D model or even a model.I hope you like the results. Stadar White pla.

Thanks for the cool model! Tried to do a nice studio render with that, mimicing the layers of a 3D print

Thank you for sharing this! Printed with FlashForge Creator Pro 2016. Took 20 hours 28 minutes. I used brown PLA with supports at 150% - 200/50 - infill 15% very little cleaning needed. I used acrylic paints (dry brushing), then I stained and cleaned off the stain right away so it wouldn't get too dark but I wanted to highlight the details, and finally a layer of clear gloss enamel on the eyes. I also used a Flex-Seal coating in Groot's head

Printed two sizes to hold stuff next to my 3D printer. I’ll paint them someday. Printed on an Wanhao i3 Plus, 20% infill with Polymaker’s PolyPlus PLA.

PETg 0.2 mm layer height

I printed him at 150% scale too! Thank you for the design!

Printed on a MOD-T. Hopefully will print on an Athorbot in a few days

Printed with B-Velta ArianePlast PLA Green 1.75mm

Printed at 0.22mm layer height. Support required.

Print came out great! Took almost 24 hours. Printed at .1mm layer height and 214 degree nozzle, 58 degree bed. Had a blast painting it and found a little plant to put in it. Kinda wish I had tested the clear coat first... a little too glossy for my taste (made everything a bit too dark as well) but still an all around awesome little project.

Printed for my wife, mothers day gift.

My boyfriend printed out these Groots on his Hypercube Evolution. I am a huge Groot fan and loved every minute of painting your wonderful designs! I haven't decided what plant to put in him yet

My boyfriend printed out these Groots on his Hypercube Evolution. I am a huge Groot fan and loved every minute of painting your wonderful designs! I haven't decided what plant to put in him yet

My boyfriend printed out these Groots on his Hypercube Evolution. I am a huge Groot fan and loved every minute of painting your wonderful designs! I haven't decided what plant to put in him yet

Thank you so much! This is an awesome design. I changed it slightly (elongated the back and changed the inside so that a self watering pot fits perfectly into it). It is printed three times the original size. I had a lot of fun painting it and am really happy with the result.

Woodfill PLA with supports

Printed in my Replikat M5 0.200 layer 10% infill

Printed on tronxy x1 with black pla filament at .2mm layer heights... love this print.. everyone who sees it wants one.

Great design, printing one out right now can't wait to paint him...gonna get some small air plants to put in him - will post again when he's all done - thank you!

getting there....

@3DofTom He's done :) I've not really painted models n' stuff before but I had fun with it - despite the horrific lack of experience ;) Thanks again for the design x

It was a birthday present for my girlfriend. Very satisfied with the model! thank you

https://www.youtube.com/watch?v=ucUW3L3GilQ Printer : B-Velta Filament : Arianeplast 3D Filaments PLA Orange Température : 200/60 °C Layer : 0.15 Speed : 50mm/s Infill : Grid at 13% Scale : 150% Print time : 16h

Great model! First time painting some 3d printed models :D It was a perfect gift :)

I finished off a 3D print a friend of mine wanted help with. I ended up molding it and casting one for myself that I just painted. It's a outstanding model, loads of fun to finish and paint. Thanks Tom! :D

Here is my Baby Groot. Painted by myself. I used Acrylicpaint. Printed with my German RepRap X400 and PLA.

3D Printed using FabX Pro 3D Printer --> https://www.3ding.in/3dprinters/fabx-pro-v2 Used Wood Composite filament.

Awesome model! Printed with PLA plastic and spend some time on painting, Thanks Tom!

Thanks for the model. Very well designed and I could see all the details! Also printed with PLA plastic and then finished it with enamel paint.

Scaled up from its original size.

Great design! My daughter loved it! She is using this to store her makeup brushes.

We are Groot. My first painted prints, thanks for the Model.

awesome model¡¡¡¡¡ great job¡¡¡

0,2 layer 10% infill 70mm

I am Groot

Great print! My girlfriend and me had a blast this past weekend painting it. Printed with Bamboo woodfill with 0,2mm layer height. In simpler words: I am Groot ;)

Printed in wood filament at 210' c with 50' c bed at .1 layer - printed 150% and it turned out great! Used the new Creality CR-X

Printed on B-Velta Renegade Edition with Marble ziro PLA Yeah, I know, it's not wood! I wanted the same as the end credits of the avengers movies :D

printed at 0.3 layer and hand painted with acrylic paint

You just can't do wrong with this awesome model ;-) Thanks so much for this.

Turn out really well, great model! This is my first attempt at painting and was a lot of fun :)

Used Cura, with supports (was quite difficult to take the supports off), 10% Infill (Gyroid), 0.2mm Layers, Scale 100% (height: 10cm), Printing time ~6 hours

0.1 layer height 12 h 5 min later result in this amazing sculpture. thanks :D from now on Groot will help me in the long sessions of digital sculpture.

bonjour, merci pour ce modèle que j'ai imprimé sur ma neva magis 2/10°mm, 17% remplissage, avec supports d'impression, 4h30, quelques bavures sous le menton et les bras, rien qui ne s'ébavure ; trop mignon !

Scaled to 270% to allow it to fit a much larger plant. Used Matchbox Wood enfused pla filament. darkened eyes with a pen, then stained with traditional wood stain

My first painted print

My first painted print, no supports

I really like this model. Printed in cura with support and 0.2mm layer height using Das Filament Pla. Used Primer and military green spray paint as ground color, acryl brush afterwards.

Creality ENDER_3 software = IdeaMaker Vs 3.30 infil= 20% shells= 1.0 support = 50°- 3.0mm temp primary 125 bed , 250 extruder temp 4 layer= 120 Bed,240Extruder Speed= 100.0 mm/s ABS

I made some rasta Groots

Awesome model. Ender3 0.4 nozzle 1.2 layer hight with supports 125% scale Just to add details on the eyes

Baby Groot flower pot: "Gardens" of the Galaxy 2 designed by @3doftom. Top design! Many thanks Printed on #ender3pro with kastanienbraun PLA from @dasfilament_de.

Awesome model :-) Printed this with a height of 33cm.

Acrylic Painting on PlA material :3

First Printjob I have ever done on a 3d Print, love it :)

Printed on Ultimaker 2+ using the FilamentOne PLA PRO SELECT Turquoise Green from https://www.filamentone.com/collections/1-75mm-pla-filament/products/filamentone-pla-pro-select-turquoise-green-1-75mm-1kg PRO SELECT filament: https://www.filamentone.com/collections/pro-select Phrozen Shuffle XL: https://www.filamentone.com/collections/3d-printers/products/phrozen-shuffle-xl-lcd-3d-printer Phrozen Shuffle: https://www.filamentone.com/collections/3d-printers/products/phrozen-shuffle-lcd-3d-printer 3D Printing Filaments: https://www.filamentone.com/collections/3d-printing-filament 3D Printing Resin: https://www.filamentone.com/collections/3d-printing-resin Fun To Do Resin: https://www.filamentone.com/collections/fun-to-do E3D-Online accessories: https://www.filamentone.com/collections/e3d-online Bondtech: https://www.filamentone.com/collections/bondtech Learn more at https://www.filamentone.com

Printed on a Balco 3d touch. Awesome design and great finished product. Well done and thanks

Looks amazing with PLA Eryone Silk Grey. https://amzn.to/39XEKTy

35 hours and 26 cm high.

Printed in white resin on Photon S (0.02 layer height), painted in wood color with a brush and a touch of shining black for the eyes. Maybe a little bit overkill with the support under the head, but it was my first "big" print on a sla printer...

Thanks for the model

3D printed groot. .4mm layer height, .8mm nozzle, at 60mm/s. Thanks for the model!

Print with a Formbot T-Rex 2+, 0.3mm Black ABS. It took auround 8 hours to print.

Thank you for the great model. This was my first experience with a wood filament. Still need to find the best settings to work with it.

Longer Orange 10

Longer Orange 10

Layer 0.2mm, height 13 cm. I want to print 25 cm

Someone in the comments over at Thingiverse clued me in to this one being the original. Thank you for sharing your awesome design!

Printed on Anet A6, pla, painted with acrylic

Printed on FLSUN QQS - Buse : 0.4 - Couche 0.2 PLA Sunlu

I love this model. It was one of my first successful prints.

Groot

Print at 0.2 wiht white PLA :) [ 15 CM ]

Printed 170% size .12mm layer height in printalot red pla on my ender 5, really nice model (I used supports)