Honeycomb NeoPixel Lamp
Support Free
Featured
28,763
views
2,621
downloads
61
collections
8 comments
Loading comments...
Honeycomb NeoPixel Lamp
3D
Published 2020-04-16T18:25:47+00:00
957
8
Add to Collection
Description
Honeycomb NeoPixel Lamp
Arduino Sketeches and Wiring information can be found in the GitHub Repository:
https://github.com/fidoriel/HoneycombLamp
EDIT 21 Apr 2020:
Added multi material version !!!UNTESTED!!!
You might need to adjust the outer wall diameter to 0.4.
Maby support is required for the cable cutout.
License
Printing Details
0.16 mm Layer hight
10% Infill
White PLA
0.4 mm Nozzle
good retraction settings needed
Pay attention that the inner shell has only one perimeter, so you need to adjust the shell diameter. Otherwise it will not be translucent.
Technical Information
Date published | 16/04/2020 |
Material Quantity | 140g |
Dimensions | 14x8x8 |
Support Free | YES |
More Information
Object Parts
I tried to slice it today but I cannot slice it correctly. I tried to print poth parts seperated to avoid the purge tower that is needed to get rid of the old color. I have problems with the inner part, the walls are to thin, if I scale it to 120% I can slice it. It would probably work if the walls are thicker, 2mm should be fine. The bottom of the outer part had a problem as well, I add a screenshot. Also it would be better if the bottom and outher walls are connected at the bottom to add the inner walls on top of the bottom. The cable tunnel seems to be floating.