wasabi317's Print of The Witcher 3 Wall plaque
Community Print 3D Print of The Witcher 3 Wall plaque
Published 2021-08-31T17:59:19+00:00
1
0
Printed on: Artillery Sidewinder X1
Material: PLA
Description
I printed this wall mount for my cousin's birthday - he's a huge Witcher's fan. I printed this with 10% infill, 3 perimeters and 2/2 top and bottom solid layers at a speed of 60mm/s. I also increased the size to 180% scale to fit the bed as much as possible. Note that for the teeth and the hole wall mounts, you do need to use support material (it doesn't mention support usage anywhere on the original page). For the paint and finishing I spray painted it with 2 coats of Krylon Brand Hardened Metal and then used acrylic paints for the red portions. Caution with the support structure removal and the teeth, those are very fragile and easy to shear off. Approximate print time for me was: 29H:54M:06S. Filament used was eSun PLA White.